Product Specifications

• ATCA PICMG 3.0/3.1 Switch

• PICMG 3.0 R2.0 ECN002 compliant

• Base PICMG 3.0 Ethernet interface:

  • 24 1GbE and 3 10GbE ports

  • Wire-speed performance

  • Layer 2 switching

  • Layer 3 routing

  • Full IPv6 support

  • L2 and L3 Multicast support

  • 10GbE & 1GbE uplinks

• Fabric 3.1 PICMG 3.1 Option 1 and
  Option 9 Ethernet interface:

  • 20 1GbE/10GbE ports

  • Wire-speed performance

  • Layer 2 switching

  • Layer 3 routing

  • Full IPv6 support

  • L2 and L3 Multicast support

  • 10GbE uplinks

• 3 mid-size AMC sites

  • AMC.0 R2.0 compliant

  • AMC.2 Type 5 (10GbE)

  • AMC.2 Type E1 (1GbE)

  • Telecom clocking (master or linecard)

  • Directly connected AMCs for PCI-E

  and SAS/SATA

The ATS1936 is a versatile AdvancedTCA Board. It can be used as hub,node, or mesh enabled board. It complies with PICMG 3.0 R2.0 ECN002 and PICMG 3.1 Option 1 and Option 9. The ATS1936 implements 2 separate switched networks on a single PCB. By separating the Base and Fabric networks, the ATS1936 provides a separate control plane and data plane. It provides 1Gb Ethernet switching on the 3.0 Base Fabric and the 3.1 Expansion Fabric provides 1Gb/10Gb Ethernet Switching. Both of these networks are fully managed with the robust management suite. Both networks support Layer 2 switching as well as Layer 3 routing.

SKUE18

Qty: 1

Alternative Part No. ATS1936 , ATS-1936, ATS 1936, AMC10G-XFP, AMC10G-CX4, TM1936-SFP+, TM1936-CX4